| Description... |
| It is not necessary to use
the fiber holders with this model. The fiber can be loaded individually
by sight as easily as with any other splicer, if so desired. |
| Specifications... |
| Splicing Method | Profile Alignment System (PAS)
Core alignment |
| Applicable Fibers | SM, MM, DS, EDF (dissimilar fiber pairs) |
| Average Loss | SM: 0.03dB
MM: 0.02dB
DS: 0.05dB |
| Splice Time | 20s (typical for SM; splice time varies depending on fiber type) |
| Coating Diameter | 250/400um coating |
| Cleave Length | 250/400um coating = 3-5mm cleave length (for high strength) |
| Splice Programs | 26 pre-programmed
6 customizable slots |
| Tensile Strength | Average of 300kpsi in a Fitel laboratory |
| Splice Memory | 400 splices |
| Protection Sleeve Shrink Time | 90 seconds |
| Heater Programs | 4 pre-programmed (for 20, 25, 40, 60mm sleeves)
4 customizable slots |
| Dimension/Weight | 180W x 260D x 160H (mm) / 7.5kg |
| Monitor | 5” color, 264X magnification |
| Manufacturer's Description... |
| The S182K is specifically designed for splicing fiber with different mode field diameters. Much like the S182A, the function keys and LCD monitor are located behind the splicing area in order to provide you with uncluttered, efficient access to the splicing area.
The S182K is optimized to accommodate 3-to 5-mm cleave lengths and features a high precision re-arcing function that produces smaller splice points and low splice loss. The S182K does not touch the bare portion of the fiber and when used with FITEL's High Strength Splicing Kits provides a high strength splice with an average tensile strength of 20N. The S182 can also be used for non-high strength applications. |
|
